CAM Simulation won't show points on toolpath

[Benjamin-Schaefer]

Hallo,

im CAM-Modul von Fusion wird bei mir seit kurzem in der Simulation auf dem Werkzeugweg nicht mehr die Punkte angezeigt.

Wie kann ich das beheben?

Gibt es irgendeine hintergründige Einstellung mit der ich das versehentlich deaktiviert haben könnte?

Viele Grüße und Danke im Voraus für die Hilfe

In the CAM module of Fusion, I can't see the points on the toolpath during simulation anymore.

How can I fix this?

Is there any underlying setting I could have accidentally disabled?

Best regards and thanks in advance for the help

Benjamin

[Marco.Takx]

Hi @Benjamin-Schaefer,

Try to restart Fusion360 by using right mouse click -> Run as Administrator.

See if that helps you.

If my post answers your question Please use  .Accept as Solution & Kudos This helps everyone find answers more quickly!

[Benjamin-Schaefer]

---

@Marco.Takx wrote:

Hi @Benjamin-Schaefer,

Try to restart Fusion360 by using right mouse click -> Run as Administrator.

See if that helps you.

If my post answers your question Please use  .Accept as Solution & Kudos This helps everyone find answers more quickly!

---

Hello @Marco.Takx,
I tried your suggestion. Unfortunately it did not work.
Greetings Benjamin

[Marco.Takx]

@Benjamin-Schaefer

I'm using Fusion 360 Ultimate and I don't have that specific problem.

Do you have it only in this specific file or in all files?

What I know at the moment that there are some issues with the UI caused by Windows Updates.

See the command of Phil.E

If my post answers your question Please use  .Accept as Solution & Kudos This helps everyone find answers more quickly!

[Benjamin-Schaefer]

@Marco.Takx,
I'm using standard Fusion. The problem occurs only on my Win7 PC. On my Win10 PC everything is fine.

[Stuart-H]

bet its your graphics card and or drivers on the windows 7 PC as you state its fine on W10 

[Lonnie.Cady · Accepted solution]

@Benjamin-Schaefer

Also make sure your camera angle is set to orthographic and not perspective.  They won't show up in perspective or perspective with ortho faces on my machine

[LibertyMachine]

I think @Lonnie.Cady hit the nail on the head. No points show up for me in either of those other modes

[Benjamin-Schaefer]

@Lonnie.Cady

Thank you very much! This solved the problem. Seems like a bug and not intended.