refused odb++ datas

a_bernhard4SNP3 · ‎03-19-2026

I tried to send our production data set with odb++ to our ems-manufacturer.

Unfortunatly he cannot import our odb++ data into his system. He told me the component layer is missing.

I took a look with odb++ viewer from Valor. There are all information about components and pads.

Here a screenshot of the Comp_+_top layer in text format

Can anyone say if there is a problem?

Best Regards

Andreas.

jorge_garcia · ‎03-20-2026

Hello @a_bernhard4SNP3 ,

I hope you're doing well. Would you be able to share your files both the design and the ODB++ files? They will never leave Autodesk and they will only be used for development and debugging.

Let me know if there's anything else I can do for you.

Best Regards,

Jorge Garcia
Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

a_bernhard4SNP3 · ‎03-23-2026

I sent you a PN.

lauri_barnhart · ‎03-25-2026

Hi @a_bernhard4SNP3,

I wanted to check in and see if you still needed assistance, or if you found a solution to your question already? Let us know if you need further assistance by providing an update or if you have found a solution, please share it with the community so other members who may have the same question could learn from your experience.

All the best,

Lauri | Community Manager