will motion limits work with + and - values together?

[safiredesignengineers]

Hi Group

can motion limits work with + and - values together?
i.e can i have a +4 value for minimum and a -14mm for a maximum with a 0 value for the rest position?

As When I try to use this mix of + and - all the boxes = the same value...?

I .e if i place +4 in minimum, then as soon as I type -14 in maximum the minimum value and the 0 value change to -14mm?? 

is this correct or a bug?

A

[g-andresen]

Hi,

---

@safiredesignengineers wrote:

…

i.e can i have a +4 value for minimum and a -14mm for a maximum with a 0 value for the rest position?

---

No!   Minimum  (-14 ) < Maximum (4)

günther

[safiredesignengineers]

Hi günther

so the values only work as a numerical value i.e the higher value needs to be a higher number. 

As opposed to working from the datum position which is zero and anything on one side is a negative value and on the other side is a positive value?

However I can't Flip the directions so my option is to move the datum, is this correct?

A