Wave Pattern Split Body - File attached

Wave Pattern Split Body - File attached

rhetteshleman
Advocate Advocate
1,187 Views
9 Replies
Message 1 of 10

Wave Pattern Split Body - File attached

rhetteshleman
Advocate
Advocate

I'm trying to create vertical slices to cut on CNC. I can get close by making a surface from the end face then rectangular pattern but it gets sloppy once I start splitting bodies. There has to be a cleaner way that is easily editable. If you click Redo you can see my failed attempts. Thanks for the guidance. 

 

test_wave.jpg

 

0 Likes
Accepted solutions (1)
1,188 Views
9 Replies
Replies (9)
Message 2 of 10

jhackney1972
Consultant
Consultant

Is this what you are looking for?  I must be misunderstanding the question because Split Body on a patterned sketch gives good results.  Model attached.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 3 of 10

KristianLaholm
Advocate
Advocate
Accepted solution

Thicken of a surface body will give you a body with all edges normal (90deg).
Skärmbild 2024-09-21 193000.png

Message 4 of 10

rhetteshleman
Advocate
Advocate

This is exactly what I was looking for. In fact, if you're the same @KristianLaholm that did a YouTube video over this topic I watched it a dozen times to get as far as I did. I appreciate the video and response. 

 

Can you please elaborate on thicken of a surface body? As you can see I created the model directly from your Youtube video, however I wanted vertical slats as you have done here. A little more clarification would be great. 

 

Thank you 

0 Likes
Message 5 of 10

etfrench
Mentor
Mentor

Rectangular pattern starting with a line at the origin:

etfrench_0-1726940928415.png

etfrench_1-1726940977625.png

Or you can use a thin extrude to create gaps between the segments:

etfrench_0-1726941439853.pngetfrench_1-1726941571422.png

 

 

ETFrench

EESignature

Message 6 of 10

KristianLaholm
Advocate
Advocate

Open the attached file in my reply and have a look.

I'm doing surface extrudes using the curved face as target (To Object)
Then a a pattern of the feature using Adjust.

And thicken (symmetric) all the new surface bodies.
This will give you the result like cnc cut "slabs"

 

Yes it's my video, thank you.

Message 7 of 10

jhackney1972
Consultant
Consultant

This process is what I proposed?  He obviously wants something different.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

0 Likes
Message 8 of 10

Warmingup1953
Advisor
Advisor

What about Slicer for Fusion 360?Slicer_for_Fusion_360__Body3_obj_.jpg

 

 

 

it can add Dowels and nest at the same time....No idea why it's an Abandoned Child!

 

 

aa.jpg

 

 

Edit: Oops Sorry I had the scale wrong:

 

aay.jpg

 

 

Message 9 of 10

etfrench
Mentor
Mentor

Just a slightly different method of creating the cutting tools and showing other options for cutting.

Slicing and moving the bodies apart will give a slightly different appearance and larger design than removing sections and keeping the same overall width.

ETFrench

EESignature

Message 10 of 10

rhetteshleman
Advocate
Advocate

I appreciate all the replies. Lots of different ways to accomplish this.