Hi Ultimate Futizens,
I call all responsible Fusion Members and particularly potential BodySweepers to give an account of the Resource Escapee from my design project as described in:
https://forums.autodesk.com/t5/fusion-design-validate-document/body-sweep/td-p/12771763
Bunny Resource (BR) curtailed my advances to progress to "more complex than cube topologies."
As I pointed out, "I will not give up … and take severe action soon!"
After some of the many legit in the 'Wild West' methods failed miserably, I need your help!
Note that the substantial REWARD for pointing out where BR is heading is at stake.
BE GOOD FUTIZEN. TAKE ON BR NOW! … but only if you are a hard-hearted, unsentimental, click&drag&only Individuum, in other words, Dry_CAD_Men.
Attached files:
StanfordBunnyWanted_A_4K_arcd.png 4K_stereo ( 8.7MB) https://a360.co/4coybKJ
StanfordBunnyWanted_A_4K_mono.png 4K_mono ( 4.4MB) https://a360.co/4coybKJ
StanfordBunnyWanted_B_4K_arcd.png 4K_stereo ( 9.5MB) https://a360.co/4cnA0rt
StanfordBunnyWanted_B_4K_mono.png 4K_mono ( 4.8MB) https://a360.co/4eJKG54
StanfordBunnyWanted_A_5K_mono.png 5K_mono ( 6.8MB) https://a360.co/4eKmsaP
StanfordBunnyWanted_B_5K_mono.png 5K_mono ( 7.4MB) https://a360.co/4eGNqjN
StanfordBunnyWanted_AB_4K_arcd.mp4 4K_stereo ( 124MB) https://a360.co/45Oweoj
StanfordBunnyWanted_AB_4K_mono.mp4 4K_mono ( 62MB) https://a360.co/45NDOzJ
StanfordBunnyWanted_A_5K_arcd.png 5K_stereo ( 12MB) https://a360.co/3VUk8FN
StanfordBunnyWanted_B_5K_arcd.png 5K_stereo ( 14MB) https://a360.co/3zxxH6J
To be viewed on 4K media devices (monitors, UHD TVs, projectors...) of reasonable performance. For the best experience, use stand-alone media applications (WMP, VLC) and the native resolution 3840x2160 - full screen. The '_arcd' files require an anaglyph red/cyan glasses, while '_al' is for active shutter glasses 3D hardware (~30 deg viewing angle is recommended). Download the files over a network, where the cost of doing so is not a concern. The files are to be used for private, non-commercial purposes only.
Regards
MichaelT
Hi Ultimate Futizens,
My call to all responsible Fusion Members for help to comprehend Escapee Bunny Th'Stanford was futile. I can only find one explanation of this fact.
“you are a wax-hearted, oversentimental, click&drag&meditate Individuum, in other words, not Dry_CAD_Men.”
Nevertheless, I captured the Bunny and dragged it recklessly by its ears to a specially designed cage where he (it) would perform a BodySweep at the click of a button.
The performance can be viewed at:
https://forums.autodesk.com/t5/fusion-design-validate-document/body-sweep/td-p/12771763
... soon ... day or two.
Regards
MichaelT
PS.
Please note some additional file links in the re-edited foundation post.
Can't find what you're looking for? Ask the community or share your knowledge.