Very slow performance in assemblies

[Anonymous]

Hey guys, please help. 

I have a very decent system setup:

i7 8550U CPU 1.8GHz 2.00GHz

8GB Ram

AMD Radeon 500 series 2048MB GDDR5

64 bit WIndows 10

Despite this I am still struggling with relatively basic assembly of 20 parts. When I start inserting the screws (no 3d theads) it just gets slower and slower until it is unbearable to work with. 

I have tried changing the display settings etc, but I'm just getting nowhere.

Please if you can help me.

Thanks,

Hamish

[lichtzeichenanlage]

Without having the design. No. Can you File -> Export and attach the design here?

[Anonymous]

Thanks for getting back to me.

I cant export the assembly as a 360 file only gives me options for IGES etc.

H

[PhilProcarioJr]

@Anonymous

Does your system have an integrated intel gfx card?

Post your gfx diag found here.

[lichtzeichenanlage]

Sounds like your design contains linked components and you either have to use the WEB-UI or to share a link.

[Anonymous]

Ok so one of the Fusion support members has called me and we identified the problem. 

I had "enable all contact sets" on without my knowing. Basically brought the whole assembly to its knees.

Easy fix - problem solved.

Cheeers!

Hamish

[lichtzeichenanlage · Accepted solution]

Jip - those will eat computer power just for fun 😉