Surfaces are not converting to solid

Surfaces are not converting to solid

valkilakrist
Observer Observer
200 Views
2 Replies
Message 1 of 3

Surfaces are not converting to solid

valkilakrist
Observer
Observer

Good members of autodesk community. I have a slight problem. For some reason the surfaces are not converting to solid when I try to stitch the part. There seems to be no faces missing from what the outside looks like.

0 Likes
201 Views
2 Replies
Replies (2)
Message 2 of 3

jhackney1972
Consultant
Consultant

Using your Stitch command, window the complete model.  the Unstitched Edges can be identified by selecting them in turn and left clicking on the Find in Window tool at the bottom of the dialog box.

 

Find in Window.jpg

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 3 of 3

laughingcreek
Mentor
Mentor

stich only works along edges.  it doesn't work when an edge falls mid face like this one does on the cylinder shaped faces.  you will need to split the cylinders along the edge and delete the unused portion-

laughingcreek_0-1736372983631.png