Sketch Pattern Suppress Checkbox Blocked

Sketch Pattern Suppress Checkbox Blocked

26-Taylor
Advocate Advocate
222 Views
1 Reply
Message 1 of 2

Sketch Pattern Suppress Checkbox Blocked

26-Taylor
Advocate
Advocate

When making pattern in sketch mode the "drag/adjust" arrow is always covering up one of the suppress checkboxes making it nearly impossible to click. Can we add just a little bit of room between these two buttons so we can use both of them?

 

(Screen grabs will go here eventually, photo upload dialogue is not working for me at the time of posting)

 

I found this workaround Sketch Rectangular Pattern Bug , but it really only solves one situation. If you have a large pattern and are working with suppressing multiple features it can be a huge pain switching back and forth from 'Extent' to 'Spacing'.

0 Likes
223 Views
1 Reply
Reply (1)
Message 2 of 2

jeff_strater
Community Manager
Community Manager

this has been reported here:  bug-report-cannot-suppress-the-first-objects-in-square-sketch .  There is already a bug in the system to track this.


Jeff Strater
Engineering Director
0 Likes