Scaling splines broken

[petttkous]

So when I make a shape using splines without changing any of the points after I placed them the scaling works as it should be but when I change anything on that shape, the whole scaling breaks completely. Example below.

Shape with no changes at allScaling of the original shapeOne point modified a bitScaling of modified shape

Do you have any ideas what could be causing this and how it could be fixed? It's really frustrating...

[SwApNiLbAd]

Hi @petttkous  you have to preselect the sketch which you draw then use scale option.

(As splines is consist of many entities in your drawing but you have selected only 1 entity so when you scale your sketch only one entity change its length other entities not ,so select the sketch then use scale option)

I hope this will help you. 

[g-andresen]

Hi,

I have tested it and found that the error occurs when the tangent handles have changed.

Moving control points alone is ok.

kind regards

günther

[petttkous]

Nope, doesn't work, the problem is what @g-andresen described.