round arrangement not possible

[kellerkind-86]

hello... i am trying to create a round arrangement.... unfortunately i had the problem again and again, that either an error message appears... c- arrangement or it funkioniert but nothing happens... I have made a video where you can see what I mean...
thank you

[laughingcreek]

the dialog box for pattern doesn't show in your video, so we really can't see anything useful.  you could export your model as an .f3d and attach.

[kellerkind-86]

sorry... here the right video.( had to use another recording program)
i always get an error message
c order 5

[davebYYPCU]

Cut the single body first, then pattern bodies.

Might help...

[kellerkind-86]

actually i want to do it this way because i think it's faster... but it doesn't work....
can someone explain this to me ?

[TheCADWhisperer]

@kellerkind-86 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[kellerkind-86]

here pls

[TheCADWhisperer]

@kellerkind-86 

See Attached.

[kellerkind-86]

how did you do that now?

[TheCADWhisperer]

---

@kellerkind-86 wrote:

how did you do that now?

---

Review the Timeline - it is all recorded in the Timeline.

[kellerkind-86]

can't see it exactly... you created bodies ? did you delete the other bodies before ? but can't you explain to me why this doesn't go through elements ?

[TheCADWhisperer]

I am shutting down for now.

I will try to come back later and explain in detail.

One key was to Pattern Faces in the disc.

[kellerkind-86]

so. i did it a little differently now... but please explain to me why this no longer works with elements ? there is an error or ?

[etfrench]

Simplest method would be to draw the half lap cutout in Sketch3 and exclude it from the extrusion.  After that, combine/cut that body from the ring.  Pattern the combine/cut feature.

[kellerkind-86]

thank you... i would like to do it with fusion 360.
and actually I would like to know why THAT does not work ? so that in the video

[laughingcreek]

we can't tell from the video, and your latest attachment doesn't seem to be exactly the same file, but I would guess that the combine feature you are patterning is cutting a notch in the side brace?  in that case the pattern isn't working b/c the combine is set to cut from a particular body.  it's not going to cut from other bodies.

I also don't understand why you have each side brace as a separate body.  are they not all identical to each other?  make one component and pattern the component. see attached model