Radial cam lift
I am not sure about the 56 degree part but attached in my attempt. Maybe it will give you a starting idea.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Sorry for the crude drawing, I’m not at my computer at the moment, it gives more of a representation. I noted the center line of the part, that is the bottom of the cam, the 56 degree noted is where it plains in with the top of the part.
@jhackney1972 wrote:I am not sure about the 56 degree part but attached in my attempt. Maybe it will give you a starting idea.
Sorry, this does not help me figure out how the 56 degrees comes into play. You statement makes not sense to me so either a better layout to define what you are looking for or just try it yourself and ask if you get hung.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
This may help, this is what I’m trying to do
@TheCADWhisperer has a good thread on similar model. Perhaps he can locate it better than I.
ETFrench
I feel I am missing some specifications like what is the diameter of the path cutter but I used .125 anyway. As @etfrench suggests, you maybe had better wait for other gentleman's input. Model is attached anyway.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
