Problem with stitching surfaces

Problem with stitching surfaces

Florian__
Advocate Advocate
1,409 Views
9 Replies
Message 1 of 10

Problem with stitching surfaces

Florian__
Advocate
Advocate

 

I tried to stitch two faces together without success.

Do you know what I can do to fix that?

 

The part is attached

 

 
 
 
 
 
 
 
0 Likes
1,410 Views
9 Replies
Replies (9)
Message 2 of 10

TheCADWhisperer
Consultant
Consultant

Uhmm, which two surfaces?

 

0 Likes
Message 3 of 10

Florian__
Advocate
Advocate

Thank You for your message. I added the video

0 Likes
Message 4 of 10

TheCADWhisperer
Consultant
Consultant

Change the seam for the Revolve.

Revolve.png

 

See latest file Attached in previous response.

0 Likes
Message 5 of 10

Florian__
Advocate
Advocate

Thank you! Sometimes Fusion is really weird. How could you find that out? Is there a reason behind?

0 Likes
Message 6 of 10

Florian__
Advocate
Advocate

 

Do you have an idear how to create a radius in the marked areas?

The part will later be deepdrown from plastic.

Florian___1-1601306049744.png

 

 

0 Likes
Message 7 of 10

KristianLaholm
Advocate
Advocate

The first problem with Stitch was that you hade selected the full sketch profile for the revolve not only the line you wanted (Left original, Right only the line).

revolvea.png


I created a curved edge by before stitching using Pipe (solid) to cut away parts of the surface.
Using Surface Patch to fill the gap and tangent connection between selected edges to get the best surface possible.
Attached my f3d file have a look 🙂 
revolveafillet.png

0 Likes
Message 8 of 10

Florian__
Advocate
Advocate

Great Help Kristian!

 

The part will be produced by deep drawing.

And will constit out of two parts.

Do you know how to improve the surface Quality? Do I need another guide rail on the sides or have to set some conditions?

Florian___0-1601369438440.png

 

The other question is how to create such overlapping. Would you do it with the loft or later?

wulst.png

 

0 Likes
Message 9 of 10

KristianLaholm
Advocate
Advocate

I'm not familiar with the manufacture process or good enough at Fusion to help to all the way.
The few thing I have picked up on surface is to keep a minimum of guide lines and points to get a smooth surface.

0 Likes
Message 10 of 10

Florian__
Advocate
Advocate

okay. Thank You!

0 Likes