Solved: Betreff: Pasten sketch goes on another coordinate

Anonymous · ‎07-06-2019

Hi there. I am trying to copy a sketch but it pastes on a different position than the original one, why does it do it?

Thank you.

HughesTooling · ‎07-06-2019

Can you make a screencast of what you're seeing. Only thought is is the original geometry in another sketch and you're pasting between 2 sketches.

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

g-andresen · ‎07-06-2019

Hi,

can you show us this behavior in a screencast?

When I copy elements from sketch and paste them, they appear at same place, what doesn´t make sense.

Then I have to move them to new position.

günther

Anonymous · ‎07-06-2019

It didn't insert the screencast because it's only accessible with link, it seems. Here it is:

https://autode.sk/2FYT95J

HughesTooling · ‎07-06-2019

Well as I thought you are copying from one sketch into another so hard to say without seeing the design. Can you Export your design as an f3d and attach. Don't use the share links, they're a waste of time.

Thanks Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Anonymous · ‎07-06-2019

Unfortunately it seems I don't have that state of the workflow saved. Thanks for the input tho!

Actually I have gone ahead of this making adjustements based with other constrains, so the real problem I have yet is the one in the following topic, which is still related to this one:

https://forums.autodesk.com/t5/fusion-360-design-validate/copying-sketches-lines-disables-surface-wh...