parts vanished when converted to stl

[Anonymous]

Hi

I have been having problems with a part in my design that i mirrored. I understand that the normals are reversed but i can't seem to get it to work for me although it has created some quite interesting results. and at one point got rid of the entire top section of my design.

I hope that you can help

Laurens

[dsouzasujay]

Hi @Anonymous,

Its difficult to understand the scenario from the description and images. Can you please attach the design (.f3d) or a screen cast video.

Are you hiding any bodies inside a component before export as stl? because STL files wont export when Bodies are hidden.

[Anonymous]

Hi dsouzasujay
Sorry if my explanation was a bit hard to understand basically I am having a problem with the normals on the part that I am designing where I can’t work out which side is the correct way around and which is not . Sorry but at he moment I can’t attach a screencast as I do not know what those are and I am typing this on my I pad I will try and sort this out tomorrow
Thanks for responding
Laurens.

[dsouzasujay]

Hi @Laurens.G.Smith,

Screen cast can be used to record your fusion 360 workflows. more details about screen cast is mentioned in below link.
https://forums.autodesk.com/t5/fusion-360-design-validate/tutorial-how-to-create-a-screencast/m-p/66...

[lichtzeichenanlage]

Side note: You should have a tool called Snipping Tool on your computer. It's much easier to use this instead of a phone to make a screen capture 😉

[Anonymous]

hi
I have now managed to capture a screen cast https://autode.sk/2sueYU4 this
shows what my design is and what happens to it when i try to export it as
an stl file to shapeways. note there are not two bodies to the construction
as i forgot to show that in the video.
hope that this helps
laurens

[dsouzasujay]

Hi @Anonymous,

looks like this is specific to the design. Can you share the model here, and some information how you are trying to save the design as stl.

[Anonymous]

hi 

here is a link to the design and the file.

https://a360.co/2Lnnrzi

from what and another person who is a lecture on this subject to him it sounds like the normals are the opposite way but i don't know how to change them. i am trying to export the component labelled body i can do this but then i run into problems when i try and put it on to shapeway some of the walls appear to vanish but in cura they are there.

I do not understand why this happening.

Laurens

[jeff_strater]

This seems like a problem in Shapeways' model import.  if I export this model from Fusion as STL, I can open it correctly in Fusion and in Meshmixer.  If you also see the correct model in Cura, I think that points the problem at Shapeways.  You can try experimenting with different settings in the STL export to see if you get different results in Shapeways.

[TrippyLighting · Accepted solution]

I've looked at this model in Blender and Meshmixer and it looks fine on bth apps.

I have experienced this before with Shapeways. It might help to export as .obj instead of .stl.

[Anonymous]

thank you all for helping me sort out this problem the idea of converting it to an obj fixed it.

Laurens 

[TrippyLighting]

Well ... you know what to do 😉