Moving a linked component by changing parameters in the assembly.

[TomaszAdamF]

I create component No. 1, which has variable dimensions by changing parameters.

I create component No. 2.

I move component No. 2 (point to point) to the point on component No. 1.

And... Component No. 2 moves with the change of the dimensions (parameters) of component No. 1.

It should be ;-).

But...

When I LINK component No. 3 (built separately) to this assembly and move it the same way (point to point) with component No. 1, changing the parameters (dimensions) of component No. 1 does not move component No 3. Component No. 3 remains permanently bound to the global coordinate system of the assembly.

Thank you for every explanation :-).

Thomas.

[lichtzeichenanlage · Accepted solution]

Assemble->Joint or Assemble->As-built Joint are your friends. Here is a simple design and a screencast what are the single steps you have to do for a joins:

[TomaszAdamF]

Oops. Of course. Loss of brain work ;-).

Thank you very much lichtzeichenanlage :-).