More blue/black line issues

[jcook27FELS3]

I am still having problems getting blue lines to turn black. If they turn black at all it is inconsistent.

In the reference picture I've attached I used the perpendicular constraint at the 90 degree corners (should be obvious for F360) - and I've used the equal constraint a few places and dimensions. None of these work!

I cannot understand what I am doing wrong here.

[g-andresen]

Hi,

please share the file for reply

File > export > save as f3d on local drive > attach to post

günther

[jcook27FELS3]

Here ya go - seems like plenty of dimensions and constraints and nothing but blue lines.

[jhackney1972 · Accepted solution]

Your sketch has a lot of missing sketch constraints and dimensions which I show in the video.  I would suggest that you left click and drag on entities to determine the missing constraints and dimensions.  As I mentioned in the video, I cannot be sure of your intended dimensions due to so many problems, please check.  Model is attached.

[jcook27FELS3]

Thanks. That was good explanation - I was able to follow along and make the changes and  figure out the remaining parts so the drawing is now fully constrained.

Much appreciated, I can now tackle some other drawings that need the same treatment.