Making changes to a imported iges file.

[machinist1990]

I have a scanned model of a manifold which came in as a iges file.  I would like to make changes to the model.  Is there someone that could make the changes I need. 

Thanks

Howard

[TheCADWhisperer]

Are you on a Windows machine or a Mac?

If Windows, then Right Click on the IGES file and select Send to Compressed (zipped) Folder.

Attach the *.zip file here.

(I am sure there is a similar procedure on Mac, but I am not familiar with Mac OS.)

[machinist1990]

Thanks for any help you can provide.
Howard

[TheCADWhisperer]

No file Attached?

You must use the Forum web browser to Attach, you cannot attach files by email reply.

[machinist1990]

Thanks for any help provided.

Howard

[machinist1990]

Good morning TheCADWhisperer,

Thanks for showing interest in my question about editing a iges model.  Is this something that can be done with the model and screen shots I loaded to the form.

Thanks

Howard

[TheCADWhisperer]

Can you describe how you would like to change this design?

What needs to be edited to make it meet your Design Intent?

[machinist1990]

I need to add 0.500 to the area where the runners meet in the plenum and
blend to the top edge. The screen shots hopefully show what I am trying
the do.
Thanks

[TheCADWhisperer]

There seems to be an issue with image files on the forum today.

Put files into a folder and then Right click and select Send to Compressed (zipped) Folder.

Attach the resulting *.zip file here.

[machinist1990]

screen shots