I have two components and I want to have one of the components slide into an opening of another component , similar like the picture below:
What do I need to do to go from the my current 3D model below (also attached as stp file) to have an opening that fits specifically a seperate component (see below) i.e. create an opening for the component to be inserted to - but I want them to act like assemblies not just do a cut
You could use Combine and set to cut to do a Boolean difference but you'll probably need some clearance. So what I'd do is start a sketch on the top face where you want the cutout and draw the shape as a sketch then use Extrude set to cut to make the cavity.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
For the assembly see the Help on joints.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
