Is there a way to add Design User Parameters to a Drawing Table?

[TStudwell]

I have a relatively simple design (A parametric Picture Frame) partly to test workflow and partly because I need a picture frame 🙂

The design seems solid and I can vary the User Parameters to define mat size, frame width, etc.

I have made a corresponding Drawing file of this design and the dimensions on all the part sheets adjust properly with each parameter change. 

However, what I would like to do is have a Sheet in the Drawing File that has a Table showing the User Parameters used for that particular instance.   Is there a way to insert a table and put User Parameters in the table on a Drawing Sheet?

TIA, Fusion Amateur..

[P-BvanWyk · Accepted solution]

Good day @TStudwell,

This is an interesting request, I can see the benefit for setting up templates and having the fields populated.

I have not seen any way to link parameters into a table in the drawing workspace.

[g-andresen]

Hi,

---

@TStudwell  schrieb:

However, what I would like to do is have a Sheet in the Drawing File that has a Table showing the User Parameters used for that particular instance.  

---

These are reflected in the dimensions of the views.
Is it perhaps to show deviating available sizes in the table.

Günther