Importing SVG not working properly, ellipsoids are not imported well

[Anonymous]

Hei Guys,

I got a Problem importing SVGs from Inkscape to Fusion.

Best way to tell you what's worng should be two screenshots.

The Ellipsoids are totaly damaged after importing.

I don't know what's wrong with the svg.

When you look at the grape, you see that the leaves are imported properly

Hope anyone can help.

Manuel

[g-andresen]

Hi,

are you sure that the imports are vectors?

Please share SVG und f3d from imported file

günther

[Anonymous]

Here is the SVG,

I designed everything in Inkscape so in my Opinion these should be kind of vectors.

[HughesTooling]

Imports correctly into Rhino so looks like a Fusion problem. @jeff_strater  Can you take a look.

Thanks Mark

[HughesTooling]

@Anonymous  Attached is an f3d file created from exporting your file as a DXF from Rhino. The scale will probably be wrong but scaling to the correct size should be easy enough.

Mark

[Anonymous]

Thank you for this Quick fix,

unfortunately I got a lot of SVGs with this issues.

So should i convert this to dxf before importing ?

[HughesTooling]

---

@Anonymous wrote:

Thank you for this Quick fix,

unfortunately I got a lot of SVGs with this issues.

So should i convert this to dxf before importing ?

---

Well until Autodesk get it fixed using DXF should work. Does Inkscape have a DXF option or will you need to use another program? Rhino does quite a good job reading the SVG and exporting to DXF but some programs have problem writing clean splines to DXF.

Mark

[g-andresen]

Hi,

if you work in Inkscape you should:
1. remove the fills and save only the contours in the SVG
2. before saving you should do a conversion from contour to path. That way you will get a double contour, but it can be removed.

günther

[jeff_strater]

bug logged as FUS-74290.  Thanks for reporting it.