I REALLY want to help! (RANT)

[Inspections_JCH]

I was reading about the User Interface Overview and thought I would reply to the binary question of "Was This Helpful - Yes/No" and 300 character doesn't do it for me. So I sent one comment thinking i would just separate each sub-comment into several that are each <300 characters.

HA!  That doesn't work. Yeah yeah yeah, there is a workaround of closing and opening it several more times, but com'on, really! I begin to wonder if the Fusion 360 team really wants honest feedback with enough substance to be of any use.

[jodom4]

Hey inspectionsCMYEB,

Thanks for trying to give us feedback! That form probably isn't the best place to do it. I'd suggest making a post in the Support forum, you're much more likely to get eyeballs and a response there.

[Inspections_JCH]

Thank @jodom4 Done. I do not commonly post in more than one Forum. But since you suggested it, I thought I would chance it.

[mavigogun]

---

@Inspections_JCH wrote:

I do not commonly post in more than one Forum. But since you suggested it, I thought I would chance it.

---

"I don't usually use more than one screwdriver..."

The right tool for the job.

[Inspections_JCH]

@mavigogunThe comparison to the Real World screwdrivers is humorous, but in that world, we can put down the flat screwdriver to pick up the Phillips screwdriver and get the job done. What sort of apology would you suggest when the forums do not seem to provide a way to move a post to a different forum? I am all for using the right tool. But in this forum as with the other forum I do not see a way to put down the second screwdriver. And I have held many tools in my hand and on some jobs we go through many different tools in our attempt to get the stubborn machine dismantled. And we reach for the closest tool rather than walking back to the truck to get the perfect shape and size.

When I learn how to delete the post I made to the wrong forum, I will gladly delete this one. 

[TheCADWhisperer · Accepted solution]

Admin Reporting