Help

[Anonymous]

I can't split this along where i have marked, on the left the plane wont divide when i sketch onto it, please help it's driving me nuts.

[TrippyLighting]

What sort of solid geometry are you expecting to receive from that sketches outline ?

You can go into patch mode, unstitch and split the surface bodies individually.

[Anonymous]

Okay I'll try to follow what you said, sorry  I'm new to CAD

[Anonymous]

No I'm still having trouble with the surface on the left side of the model, it won't split/separate.

[Anonymous]

I think it's because i made the model weirdly, I'll just try re doing the whole thing

[Anonymous]

And that didn't work and I've just wasted many hours 😕

[daniel_lyall]

Can you post the model file you are working on, Go to File -> Export and save as a .F3D Archive File and attach it to your next post

[Anonymous]

Sure, I also attached at the top I think

[davebYYPCU]

As @TrippyLighting said, it is hard to work out just what bits are needed for the trim tool,

the plane at the end of the model is not apparently aligned through the body,

Working from file from first post, and yes a wonky set of manouvres so far, why is there one line per sketch near the end of the timeline?

Can you add more detail for what you want?

[Anonymous]

Basically I just want the sketched outline that I've done to split the 3D model into two parts

[davebYYPCU]

Good luck with that,

there are as many as 8 possible plenes involved in the sectioning lines,

[Anonymous]

I don't understand why it doesn't let me do it easily

[Anonymous]

It's just that one plane on the left that wont split 

[daniel_lyall]

What sketch number is the one to use for splinting the model there are a lot of sketches on the left side and only sketch planes no planes 

[Anonymous]

I don't fully understand, if you could split the model as intended and attached it to this post I'd be very grateful

[davebYYPCU]

Your original file does not have any Construction Planes, the Origin planes are on the top corner.

The article that looks like a plane on the Origin is the profile from the original plate you made, before the chamfers.

There are 15 sketches on the end of the time line, each has one line in it.

We haven't worked out where to split the model yet.

[Anonymous]

😕 yeah I still don't know how to do it...

[daniel_lyall]

@Anonymous Take a screen grab of what you wont and open it in paint and draw an Arrow where you wont it split

[daniel_lyall]

@jeff_strater All your's

[Anonymous]

I've gone round all the sketches and split them all, how do i now split the whole model