Fusion
I have used Square in the Screencast, You use similar shapes, And you can get the shapes...
Screencast Video... 👉 https://autode.sk/3gplKm2
Once you create the Hollow Sphere, just sketch random shapes...
And before that, create some planes at angles, and sketch on all those extra planes...
Another Example.. Screencast Video.. 👉 https://autode.sk/3v82u23
Huge thnx, but not exactly what I need.
If you see my attached image you will understand how the 4 segments of the sphere is.
The four of them will be joined together to bring them together into a sphere.
So I need a way to put patterns like this (just bought a bunch) see the picture I attach.
This pattern should be across the entire sphere so that they join at each segment.
That pattern has holes and islands that fall out.
Sheetmetal wrap, will get you nearby, but the pattern will need the internal ball to glue the islands to.
Might help....
No Doubt @davebYYPCU has done an amazing Job. But he has also mentioned it will need a inner solid body to glue the islands... And your's is a hollow one..
If you are okay with the sphere being a solid, than I guess it's good for @davebYYPCU to make the screencast..
Ok, 600 x 8 x 3 mm to the outside,
The tricky bits,
Working backwards down the timeline, all the panels were combined to one globe.
The globe is divided into 6 panels, better chance of compound bending, (over a 4 panel effort,) and your flower seemed to work better for 6 panels
These panels were built with 1/4 being mirrored twice.
The flanges are unfolded, move to the solid modelling area to cut extrude etc, when done refold in Sheetmetal.
The temporary body is made by a trimmed ellipse, 15 degrees off horizontal, extruded thin wall at 8mm and nominal thickness, (only needed to make an emboss outline, for dxf and extrude cut the waste off the flange. Split Body to trim the folding portions off it.
Save Sketch 4 as dxf and edit / trim the unwanted sections.
Cut 12 off front and backs
Step up the timeline, ask questions.
Might help....
