HELP !!! I can't open or save files in Fusion 360 !!!!!

[Anonymous]

I cant open files from samples in both online and offline or ether save new files ????¨

The save botton is gray and can be used in new file, and can se the sample, but not open any of them.. I can click Open, but there happent anything.... Help, i cant further with my work.....

But I cant find my last updatet work in the online mode, but only in offline mode... I realy hope that will show op in online, when this problem is over.... 

[kris_berg]

I am sorry you are having issues saving and opening.  Rest assured that your data is not lost since you can see the updates when you go offline.  I have asked someone that is more familiar with this issue to look at your post.  In the meantime, I do have one suggestion.  Can you log out and then try logging back in?  It may help.

Thank you,

Kris Berg 

Fusion 360 Development

[kris_berg · Accepted solution]

Hi Morgan,

It looks like from the following post http://forums.autodesk.com/t5/general-fusion-360-questions/can-t-load-or-save-file/td-p/5407323 you were able to save again by resetting your preferences to their default values.  We are still analyzing your logs to help us pinpoint the exact cause of your issue.  We have several individuals looking at it.  We will update this post with any findings.  Sorry again for the issues you had this weekend.

Thank you,

Kris Berg

Fusion 360 Development

[Anonymous]

Hi, It was my post, but in the wrong place 😉

So I have soled the problem… But how it happens, iI dont know, Because i have not been in the preference and change anything.

Morgan

[kris_berg]

Hi Morgan,

We continue to investigate the issue you had. We want to better understand how resetting the preferences fixed your issue.  Can you send us your logs again, now that it is working? 

Thank you,

Kris Berg

Fusion 360 Development

[Anonymous]

Morgan

[kris_berg]

Hi Morgan,

Are you having file save and open issues again?  If so can you send me your logs?

Kris Berg

Fusion 360 Development

[Anonymous]

Hi Kris Berg

The attached dittent come with the last mail, so I try here ind the Blog.

It make the error all time, 2-3 times a week.

Precedure for change to good:

1. Change some sittings

2.. Apply

3. Reset Sittings

4. Close Program

5. Open Program

6. Vola !!!! It work again…But not okay….  

I have attached a log file while error and after change to good…

Please get back to me as soon as possible, for a solution..

Morgan

[kris_berg]

Hi Morgan,

Thank you for the log files.  We are looking at your issue and have a identified a probable cause.  I will let you know as soon as I have more information.

Thanks,

Kris Berg

Fusion 360 Development

[kris_berg]

Hi Morgan,

We believe we have identified the problem.   It was an issue with your account.  Can you try launching the application again and see if you can save and open files?   We are still sorting out all of the details to ensure it does not happen again.  Please let me know if your issue is solved.

Thank you,

Kris Berg

Fusion 360 Development

[srinath_jonnalagadda]

Hello Andreas,

As Kris mentioned, we found an issue with how your subscription was processed. We have since fixed the issue. Please check back into your account tomorrow and let us know if you continue to see problems. Sincere apologies for the inconvenience.

Cheers,

-srinath

[Anonymous]

 I have the same issue. reset the preferences wouldn't help. can someone help me ?

[matt.pooley]

Hi Ralf,

Could you collect diagnostic log files and forward to me at [email protected], this should let us investigate and hopefully solve the issue you are seeing.

Regards,

Matt Pooley

On Behalf of the Fusion Dev Team

[Anonymous]

I have the same problem. 

I already re-install the software, but still doesnt work.

Vicki

[kris_berg]

Hi @Anonymous,

I am looking into your issue.  Have you ever been able to open or save files in Fusion 360?  Can you send me ([email protected]) your logs?  To retrieve your logs, go to the help menu (the one with a ?) and select the "Diagnostic Log Files" command.

Thank you,

Kris Berg

Fusion 360 Development

[Anonymous]

Hello,

I have the same problem, it is impossible for me to open, save, or print anything.

C'an you help me please ?

[matt.pooley]

Hi Animapix,

Your symptoms match what would occur if you have been running a trial which has now expired. If you could send your Diagnostic Logs through email (to [email protected]) we can investigate further and advise on the next steps.

Regards,

Matt Pooley

On Behalf of the Fusion Dev Team

[marcus.harvey55]

Hello all. I'm new to fusion 360. Made a drawing. Can't save it. ? The save feature is grey and i can't click on it. Can anyone help? My laptop has been on all night so i don't lose my work.

[brianrepp]

@marcus.harvey55 Were you able to try any of the suggestions from Nicolas in the thread you started here?  Let us know.

[James.Youmatz]

Hi @marcus.harvey55,

Can you also do me a favor and post a screenshot of your About dialog box. This can be found in the Help menu in the top-right corner of Fusion 360. I am looking to see what your entitlement says next to Active Plan. Thanks, and let's work in the other thread as @brianrepp mentioned to continue this.