Fusion Crashing

[Anonymous]

Hello,

I am having a lot of crashing going on with Fusion over the past week or so. it has happened to me 4 times in the past hour. the last code was 

  CER_134830797. I did not catch all the others.

I have another setup in our shop running and it seems to crash at least 3-5 times a day if not more.

I have read other reports and this is what i have tried:

1. Out of 15 operations i only have 2 with yellow warnings, these are due to lift planes.

2. I use a space mouse on this computer but not on the one that is crashing the most so I do not see that being the problem. 

3. I have of course turned it off and back on again. 

4. I've Uninstalled completely and reinstalled fusion.

5. I have updated all drivers on all computers to the latest updates.

6. I have changed all preferences to optimize performance.

7. Performance on the shop computer is definitely capable of handling fusion. The current computer is a CAD machine for AD Inventor and runs 10 time faster than my shop computer but is still crashing the same.

Need some sort of advice on where to go from here.

Thanks

[chengyun.yang · Accepted solution]

Hi, 

Sorry for the crash issues you ran into. I checked the crash reports in you sent out in the past few days. It seems that there are two problems: one is related to 3D mouse and the other is related to one line style display problem. For the latter issue, we probably will release a hot fix tomorrow. For the first issue (3D mouse issue), according to the internal bug tracking system, this will be released in August 24 update.

Thanks

Chengyun

Fusion Development Team