Fusion 360 Maintenance COMPLETE

[brianrepp]

UPDATE at 10:21am PST on Jan 29, 2017 - Maintenance is complete and you should be able to get back to business, thanks again for the patience!  F360 should automatically come back online within the next ~15mins, but restarting F360 should also do the trick.

All - Fusion 360 has begun planned maintenance. Our time for this window is from 6:45 AM PT to 11:00 AM Pacific time. Fusion 360 online workflows will not be available during this time, but you can continue to work offline. We apologize for the inconvenience and appreciate your patience while we work to improve your experience.

This update is working on the back-end, so will not be including any additional functionality or fixes within Fusion 360 itself.

[brianrepp]

UPDATE at 10:21am PST on Jan 29, 2017 - Maintenance is complete and you should be able to get back to business, thanks again for the patience!  F360 should automatically come back online within the next ~15mins, but restarting F360 should also do the trick.

[macmanpb]

After maintenance work fusion won't start.

[macmanpb]

Ok, i have delete "loginState.xml" and boom fusion runs again.

[bespenship]

Thanks Peter - that's a big help / clue to help us narrow down the problem.  One of our team members also hit that issue following the maintenance window, and we have his log files.  If you don't mind, can you send your diagnostic log files to brent.espenship @ autodesk.com ?

Thanks again and cheers,

[macmanpb]

Have send to you...