Exporting Spline as a DXF

[Anonymous]

Hi! I am having trouble exporting Splines in DXF Format, When i try to do this it exports the pull bars which adjust its curvature, and not the spline itself. 

Is there some way to export a dxf directly from a surface like in solidworks? 

[HughesTooling]

Just did a test using Rhino, what I noticed was I only got spline handles on points I'd edited apart from that the spline opened fine. The problem with the spline handles was reported a long time ago guess it never go fixed!

Mark

[Anonymous]

(Just realized i posted in a different profile, Having other issues that have forced me to create two to access my designs :/, and i usually forget which one i'm in before posting ) 

This is what i'm getting: 

DXF:



Actual FIle: 




It has also done some weird stuff in the lower left corner of this design, exporting a feature that isn't even in the sketch: (see the deformed slot)



Opening in A360 Viewer gives this, Splines are there now but it is missing other features

[HughesTooling]

Don't know what you need the splines for but there is a plugin that convert spline to plines.

https://apps.autodesk.com/FUSION/en/Detail/Index?id=4611814297957846949&appLang=en&os=Win64

Mark

[Anonymous]

Thanks for the link! ill check it out! 

In that case the lines ended up being relatively straight, but that was not my initial intention, so that is why i was using a spline, 

Still confused as to why some segments of the sketch are not showing in A360 Viewer, while they do in a different DXF Viewer and why segments of the DXF do not match the shapes displayed in the sketch.