exporting dxf post problem.

[nocturnalwelding]

Hi everyone hope things are going well.  This is my first assembly and its been a journey. last step of this journey is to post it as a dxf.  I tried projecting and saving as a dxf but it comes out all wrong.  I'll post a pic of it in a solid and as dxf. I also tried the autocad dxf post processor.  I posted using it then uploaded back into fusion and fusion just stalls out with a black bar on left when i try to open it. Any help is super appreciated thank you.

[saito.kh]

Hi @nocturnalwelding ,

Thank you for posting in the community!

Sorry to hear that is happening.  Can you please share the assembly file (that you were workind on) with me?  I would like to take a closer look at this behavior on my end.

If it is fine for you to share the file, can you create a public link to the file and post the link here?  You might like to send it to me directly (kanehiko.saito@autodesk.com).

This link guides how to create a public link to a design file.  ** Please make sure to enable the "Allow an item to be downloaded" option in the dialog.

If you have any questions, please let me know.

Thanks.

[saito.kh]

Hi @nocturnalwelding ,

Thank you for sharing the design file!

I sent an email to you.  If you have any questions, please feel free to reach out to me!

Thanks.

[nocturnalwelding · Accepted solution]

thanks just  sent another email.

[nocturnalwelding]

Finally got if figured out with saito. IF your dxf is messed up just resketch the messed up parts and project again. hope this helps people in the future.