Stuck on a workflow? Have a tricky question about a Fusion (formerly Fusion 360) feature? Share your project, tips and tricks, ask questions, and get advice from the community.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I spent a good while editing the default ANSI_TITLEBLOCK, in Fusion, to get it how I wanted it. I saved it as "MyBlock." I expected that when I opened a new drawing I would then be able to select MyBlock as the title block for that new drawing, but that doesn't seem to be the case. In the original drawing, MyBlock shows up alongside the ANSI title block, but in any new drawings, ANSI is all that is available. Is there any way I can access that custom title block in new drawings?
Hi @Anonymous, title blocks are always available based on which ones are stored in the template used to generate a Drawing. To re-use a custom title block, make sure that a template is created with it in it, and use that template to create future drawings with. Let us know if you have any other questions!
Fusion
