Create solid body from sculp plane

Create solid body from sculp plane

hackbratenMTTKN
Enthusiast Enthusiast
902 Views
6 Replies
Message 1 of 7

Create solid body from sculp plane

hackbratenMTTKN
Enthusiast
Enthusiast

Hi folks, 

I'm pretty new to the entire free forming stuff. 

Today, I wanted to attach a handle-shaped curve to an existing body.

As I can see, the curve that I created with the "Create Form" feature, I like a piece of "paper" but not a solid model. Therefore I cannot combine this handle-shape with the existing body.

Maybe this is the wrong approach but I hope someone can guide me to the way of success 🙂 

Thanks in advance!

Paul

3.PNG4.PNG

0 Likes
903 Views
6 Replies
Replies (6)
Message 2 of 7

Marco.Takx
Mentor
Mentor
I think you are looking for the replace face command.

Met vriendelijke groet | Kind regards | Mit freundlichem Gruß

Marco Takx
CAM Programmer & CAM Consultant



Message 3 of 7

TrippyLighting
Consultant
Consultant

There are two ways to do this.

 

1. as @Marco.Takx has already mentioned is replace face. In order for that to work, however, the wave shape cannot have that U-Shape. A curve is fine, but you are basically going to replace a flat face with the curved face of the wavy surface.

Also, you should put fillets at the end of the timeline. Tying these operations on already filleted geometry is not a good idea. Cosmetic fillets are secondary surfaces.

 

2. You create your handle in the patch workspace and then match the T-PSLIne edges to surface edges. Once done with the T-Spline it converts into a surface and then you can stitch the two.

 

In general this shape does not require attaching T-Spline geometry to a solid at all.


EESignature

Message 4 of 7

hackbratenMTTKN
Enthusiast
Enthusiast

Thanks for your answer.

What would the corresponding workflow be?

Don't use the "create shape" function but use the patch workspace?
In the patch workspace, I'm not able to create a plane with individual faces to push and pull the geometry, right?

 

Sorry, I'm failry new to anything that is not Modeling related 🙂

0 Likes
Message 5 of 7

hackbratenMTTKN
Enthusiast
Enthusiast

Besically yes, but I'm getting an error there unfortunately

5.PNG

0 Likes
Message 6 of 7

Marco.Takx
Mentor
Mentor
Is the upper face also selected? It looks like in the picture. I think thats the problem.

Met vriendelijke groet | Kind regards | Mit freundlichem Gruß

Marco Takx
CAM Programmer & CAM Consultant



0 Likes
Message 7 of 7

TrippyLighting
Consultant
Consultant

The shape you wat to create determines what tools are best to use.

 

It's not wrong to use a T-Spline when the shape requires it. Maybe you can create the complete handle shape as a T-Spline. However, the front of your T-Spline looks flat so that can be better done with a Spline and split body command.

 

Or you want the front slightly curved. Then you can sweep a curved line along that spline and end up with a surface. You can then use that surface to split the body.

 

For example this wavy front face would be more difficult to create in the Path or Model environments, so I creates a T-Spline surface face and split a solid body with it.

 

Screen Shot 2018-09-03 at 3.50.41 PM.png

 

Edit: Note that I applied fillets as the last step!


EESignature

0 Likes