Create 4 sided profile for table pedestal

[csbrads]

I am trying to make a table pedestal that is square, I have the profile drawn and cannot figure out how to wrap the profile around all 4 sides.  I believe I should use the sweep tool but have not been able to get it to work.  Advice would be much appreciated.

[seth.madore]

It would be helpful to see what you're trying to make, so either screenshots or the actual Fusion file would be greatly appreciated.

Oh, and this is a Design question, so I've moved this to the proper forum 🙂

[csbrads]

Here is a picture of what I am trying to maketable pedestal

[g-andresen · Accepted solution]

Hi,

try it this way:

günther

[TheCADWhisperer · Accepted solution]

See Attached...

Dimension Sketch1 as desired.

[rushabhthakkar_910 · Accepted solution]

You can also create this with Loft command..!! 

(https://www.youtube.com/watch?v=cuqaT-lpT8c)

[Bunga777 · Accepted solution]

I made it too.

The method of making it may be the same as others.

Prepare a square pillar of just the right size.

Draw the exterior curves using the canvas as a reference.

Cut out with Extrude by its profile.

Circular pattern copy is performed 4 times using the central axis.

Completion.

Click here to see a video of the series of work.

https://knowledge.autodesk.com/community/screencast/aaa89fa8-11a5-473f-be4c-4fb646154198

I have also pasted the data.

[csbrads]

Thank you for your willingness to help.  This forum is Awesome

[csbrads]

Awesome.  Thank you very much for taking the time to help.

[csbrads]

Thank you so much for helping me.

[csbrads]

Is there a way to save the video for future reference