Changing diameter in multiple holes.

[litodrums]

Hello,

I have a plate with 64 holes that need the diameter to be increased by 0.005" larger. 

How do I change all 64 holes simultaneously.  They are all set currently at 0.500"

I have enclosed a file of my project.

Thank you very much for your help

[litodrums]

This post should move to Support. Thank you

[jahnj0584]

If you did the CAD properly, change the driving .500 dim to .505. The easiest thing would be to run a -.0025 radial offset at the controller. 2nd option is do -.0025 stock to leave in your CAM and repost.

[TheCADWhisperer]

---

@litodrums wrote:

This post should move to Support. Thank you

---

@litodrums 

No.

Did you read the guidelines over there?

That forum is for bugs.

This post is in the correct location.

[TheCADWhisperer]

---

@litodrums wrote:

I have a plate with 64 holes ...

---

Is there a logical reason why you created 64 Hole features rather than one Pattern?

Did you intend for the hole locations to be symmetrical on the plate?

Edit one hole feature - edits all holes in the pattern...

See the Attached file.

[g-andresen · Accepted solution]

Hi,

here´s a pattern screencast

günther