Can't select the entire projected geometry.

[reik_001]

Hello.
Have a problem when I try to select all sketch geometries.

I project geometry from 3D model to sketch that include some small parts, and when I try to select all parts, small ones are didn't selected.

"Select Through" is off.

What's the problem?

And another one question, when I choose all geometries manually, then click "Break Link" and try to rotate, there is nothing happens, why?

[masa.minohara]

Hi @reik_001,

Thank you for posting your question! Could you try turning on "Select Through" option? Or try double clicking a line to select all the connected entities? 

Regarding rotating the sketch, how did you try to rotate it? Did you use Move command? Would you be able to share a public link to the design or attach the design here?

[reik_001]

Here is sketch geometry from model in attachment.

There is no changes when I turn on "Select Through" option. Double click on it select area only with few lines.
Yes, I try to rotate sketch by selecting all lines, then press "move", select pivot point, and write an angle.

Thanx for reply.

[masa.minohara · Accepted solution]

Hi,

Thank you for attaching the design! It looks like this is a known issue, and to work around this, you need to zoom in and select those small pieces of entities. I am sorry for the inconvenience.

Regarding rotating the sketch by using Move command, did you click on "Done" button after setting Pivot?

[reik_001]

Now rotation is complete, thank you for advise. For the first look this green check mark looks like seting pivot point is done )

But with selection of sketch geometries looks like a lot of unnecessary work... Hope it will fix in future.

[Anonymous]

I'm very new at fusion.  seem like you can't select Bodies AND components at the same time.  I still don't understand the concept of bodies vs components.  I am drawing shower doors.  As i create an assembly, i want to "Group" it, lock it together.  I.E a piece of glass with roller bracket attached and a trim piece across the bottom.  If the glass is a Body and added parts are components, when i move the assembly, one or the other doesn't move, with select thru checked. so, i draw everything as a component and change all bodies to components and don't have a problem except for the quantity of small parts to be grouped.

If anyone would like to comment, i would be interested !

Norm