Another plane tool?

[patmat2350]

Coming from CATIA... one of my most used construction tools for planes was "Parallel through point" (pick another plane, pick a point anywhere, new plane is created through that point parallel to original plane).

Am I missing an easy way to do this in F360? 

Anyone else already asking for this?

Thx, PM

[jeff_strater · Accepted solution]

Yes, this is a limitation of Fusion currently.  I found quite a few IdeaStation items for this:

• https://forums.autodesk.com/t5/fusion-360-ideastation-request-a/paralle-plane-at-point/idi-p/7131790
• https://forums.autodesk.com/t5/fusion-360-ideastation-request-a/point-selection-for-offset-plane/idi...
• https://forums.autodesk.com/t5/fusion-360-ideastation-request-a/specify-offset-plane-distance-with-a...
• https://forums.autodesk.com/t5/fusion-360-ideastation-request-a/plane-parallel-to-plane-through-poin...
• https://forums.autodesk.com/t5/fusion-360-ideastation-request-a/construct-plane-using-both-reference...

You should vote for these items (and I'll see about getting them combined into one)

[patmat2350]

Great- I will vote often!

Thx