Fusion 360 Preview Functionality
We’re talking the latest Previews. Love it? On the fence? Want to access? Discuss here.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Sheetmetal Crash

8 REPLIES 8
SOLVED
Reply
Message 1 of 9
HughesTooling
1387 Views, 8 Replies

Sheetmetal Crash

I tried using the trick where you drag a sketch into a component if you forgot to create one when you start designing a part. It looks like it works until you try adding another flange then Fusion crashes.

 

Edit I see where I went wrong, I used the right click on the main component to create a new component not the New Component from the toolbar in the sheetmetal workspace.Smiley Embarassed

 

I'll attach a screencast later, it looks like the outage that's taken Fusion offline is affecting screencast uploads as well.Smiley Mad

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


8 REPLIES 8
Message 2 of 9

Hi Mark,

 

Trying to reproduce the issue, but I dont see the crash.  Would be good if you can add a screencast.

 

One thing to note - if you create a regular (non-Sheetmetal) component by clicking on NewComponent command in the right click of a component in the browser, it does create a regular component. If you however add a sheetmetal flange feature to it, it is automatically converted to a sheetmetal component.  

 

Regards

Gautham



Gautham Kattethota
Software Development
Message 3 of 9

Hi Gautham

 

Here's the screencast I recorded I also filed in the crash reports.

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Message 4 of 9

Hi Mark,

 

I can reproduce this crash.  Thanks for sharing the screencast, helped a lot.  We will fix this issue soon.

 

Regards

Gautham



Gautham Kattethota
Software Development
Message 5 of 9

This is getting fixed in our April 12 update! 


Keqing Song
Autodesk Fusion Community Manager
Portland, Oregon, USA

Become an Autodesk Fusion Insider



Message 6 of 9
HughesTooling
in reply to: keqingsong

Hi @keqingsong Did the April 12 update get pushed back?

 

Also how did you end up with minus 17 ideas, do they take points away if it's a bad idea?Smiley Surprised

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Message 7 of 9
brianrepp
in reply to: HughesTooling

@HughesTooling - yep, the April 12th update was pushed back.  Hopefully should go out this week!

 

LOL at Keqing and all of his negative ideas. Smiley Wink

Message 8 of 9
daniel_lyall
in reply to: brianrepp

Keqing cursed the updateSmiley Tongue, he should never give a date.


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn

Message 9 of 9


@daniel_lyall wrote:

Keqing cursed the updateSmiley Tongue, he should never give a date.


 

Waiting for Keqing's ideas to change to minus eighteen.Smiley Tongue

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report