I think with the latest UI update, the config button for postprocessing disappeared. That is unfortunate because I don't know the location of any of the CPS files (Mac version), and I'd like to write a postprocessor for my CNCRouterParts Benchtop Pro starting with one of the existing files.
Does anyone know where these files are on a Mac?
Solved! Go to Solution.
Solved by MattWynn. Go to Solution.
Can you search for .cps files on a mac? If you still have trouble finding them, most of the generic posts are on github, https://github.com/autodeskcam.
Do NOT use the generic posts location for anything you have customized, that location changes when updates get pushed out and you could loose your file.
There should be a location for 'personal posts', which is a good place to use when developing the configuration.
Once you have the post working, I recommend using the cloud location, there should be a CAMPosts folder on your A360 page, https://myhub.autodesk360.com/portal/folders/. You can not really exit the file that is there, (except for download, edit, upload), but will always be there from any computer.
I would recommend using the personal post location /Users/<user id>/Autodesk/Fusion 360 CAM/Posts . This way IF they move the default folder you won’t have to search for where they move. Also if you’re using a modified post with the same name of a stock post it won’t get over written.
Can't find what you're looking for? Ask the community or share your knowledge.