Fanuc canned cycle support

[tim.gsmachine]

Hello 

A great feature to add to the already great supported canned cycles for drilling,tapping, boring, etc would be to add the support for lathe cycles. Maybe start off small with G70, G71 for roughing and finishing profile turning and progress from there. The information for the cycles are already being input in the operation drop down boxes, all that would be required is modification to the post for the syntax of the Gcode. 

I think given the sheer number of users with fanuc controlled machines, this would put a big smile on their collective faces 

O0004
G00 X200 Z10 M3 S800
G71 U2 R1 F200
G71 P80 Q120 U0.5 W0.2
N80 G00 X40 S1200
G01 Z-30 F100
X60 W-30
W-20
N120 X100 W-10
G70 P80 Q120
M30

[cj.abraham]

This has been in the works for a while. Expect this in a future update.

[tim.gsmachine]

Do you have an ETA on when we could see this added into a future update ???

[dmartinS68QJ]

@cj.abraham Is there an update to this feature request?

[michaelthompson83]

I cannot believe you's actually released this software in the first place without including this as an option? A year has passed by and still no updated. People should be sacked over this!