Magically moving joint?

[robduarte]

Hi all, I'm trying to create an as-built joint and immediately after creating it, its position jumps over to a new location. I know it's got something to do with having moved components, but I can't figure out how to resolve the issue. I can provide the design file but I'm hoping someone has some answers just by looking at the screencast: https://youtu.be/qEIlt6HXWAY

Thanks for any help

[robduarte]

Ugh: if I edit the joint, delete the Position, select the position (center of the axle) again (same way I selected the position when I created the joint), then click OK ... it stays in position without jumping as it did in the screencast. I'm going to call this a bug unless someone has some other explanation?

An updated screencast: https://youtu.be/xVBnQ1rGL80

[TrippyLighting]

@jeff_strater we've seen this over the weekend as well. This is another example.

[TrippyLighting]

@jeff_strater I've seen this over the weekend here as well. @robduarte's design is another example.

[daniel_lyall]

There is a couple of guys on the fusion user's facebook group haveing the same problem

[jeff_strater]

Yes, this is definitely a bug.  @robduarte, is there any way we could have this design, so we can investigate?  It is strange that an edit will fix it.

@TrippyLighting, I think this is a different problem than in Saeed's post, because in his case, As-Built worked, but regular Joint did not.  But, there is clearly something wrong in both cases.

Jeff

[TrippyLighting]

@jeff_strater nope, same thing. See screencast. Model attached.

If I pick the revolute part on the link it fails. If I pick the revolute point on the base it succeeds.

Edit: You mentioned in Saeeds thread that the assembly behaved wonky. This is what I though you meant.

[jeff_strater]

filed as FUS-33516.  Thanks for reporting this, and sharing the design!

Jeff

[jeff_strater · Accepted solution]

This bug has been fixed in our internal builds.  It should appear in an upcoming update.