Re: Eagle Certification

Anonymous · ‎06-29-2018

Hi! Is there an Eagle certification or PCB designing course? Thanks

jorge_garcia · ‎07-02-2018

Hi @Anonymous,

Thank you for visiting our forums! We don't currently have an official EAGLE certification, however it is something we would like to do at some point.

Let me know if there's anything else I can do for you.

Best Regards,

Jorge Garcia
Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

fededc88 · ‎10-28-2018

Hi!

I would like to know if there have being any update about Eagles certifications.

Thanks

Federico Ceccarelli

Anonymous · ‎07-23-2019

Hi,

Any updates on this topic?

Anonymous · ‎07-23-2019

Hi,

I would also like to know if there are any updates about an official eagle certification.

Thanks,

jorge_garcia · ‎07-23-2019

Hi Everyone!

Thanks for bumping this thread. At this time I don't have any update to report, however your posts show that there is interest in such a certification. If anything changes on this front we'll post to this forum to announce it. In the meantime feel free to ask for an update whenever you wish.

Best Regards,

Jorge Garcia
Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

simonet103 · ‎10-17-2019

Hi, I'm also interested in an Eagle certification. Are there any updates?

Thank you,

Simone

jorge_garcia · ‎10-18-2019

Hello @simonet103,

I hope you're doing well. No updates on this at this time. We still don't have a certification program.

Best Regards,

Jorge Garcia
Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

Anonymous · ‎03-27-2020

Hi, I'm also interested in an Eagle certification. Are there any updates?

Regards,

Eduardo

Anonymous · ‎01-02-2021

I am also interested in an Eagle certification.

fededc88 · ‎09-08-2021

Hello Eagle community!

Is there any update?

jorge_garcia · ‎09-08-2021

Hello everyone,

Thanks for continuing to bump the thread. Unfortunately, no new updates at this time. We still don't have any official certification.

Let me know if there's anything else I can do for you.

Best Regards,

Jorge Garcia
Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

Anonymous · ‎10-14-2021

Hello,

After one more month there isn't any updates on this matter. I guess that, what Autodesk has not developed in 3 years (since this thread first message) won't be done in this short period.

It would be useful, for us professionals, to know if Autodesk intends to create a certification for the Eagle PCB product in the foreseeable future.

Anonymous · ‎10-14-2021

They probably won't. I just took the class on Udemy and it was enough to
learn the basics and everything else I just tinkered with and learned on my
own. Is it professional? No. But I did learn just enough to get hired only
to learn another software for work. So I'd call that a win.

-a struggling student-

dball5A3KK · ‎01-19-2022

If eagle are looking for partners to run their certification program, i work at a FE college in Glasgow, Scotland and we currently run lots of other certification programs for cisco,microsoft, orcacle, etc.. and are a testing centre for all of them. I teach students how to use eagle as part of their HND and feel a certification program would be very useful for this product like the ones for other products. It shows potential employers a level of competence. I also feel that it would not be too difficult to develop the requirements. I also feel this would be a good move by autodesk as their product is used in the world skills competition.

Slightly off topic but when will the new version of ngspice be supported and when will you add more basic models such as 555 timers, SR bistables etc to those available. As at least with the new version it supports pspice compatibility, i know you can manually upgrade it but this is not supported by Autodesk.

pmuell · ‎01-19-2022

@dball5A3KK i hope you are well, we currently don´t have a Certifications for electronics available but do you happen to know the WorldSkills UK Industrial Electronics Competition ? https://www.worldskillsuk.org/competitions/industrial-electronics/

We are currently moving the Competition to Fusion Electronics. Did you happen to have a look at Fusion already ?
We do have Fusion 360 Certifications available via Certiport / Prodigy which might be the Certification provider you are also using for Microsoft https://certiport.pearsonvue.com/Certifications/Autodesk/Certifications/Certify.aspx#Fusion-360

dball5A3KK · ‎01-19-2022

Im aware of fusion and that eagle is now classed as part of the suite, and at the last meeting I attended for the electronics world skills UK we were discussing eagle, not fusion, will this fusion certification cover pcb design and manufacturing

Eagle Certification

Eagle Certification

Eagle Certification

Forums Links

Post to forums