Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
The screenshot looks like you only get this on a few pads, yes? One common cause of this is if the nets associated with those pads have a non-default net class that defines larger clearance requirements.
That said, you're using a non-standard palette which confuses me a little as to what's what. The highlights (which I assume are the DRC markers) are a slightly odd shape. It also looks like perhaps there are some layers that are hidden? Worth a look on them.
The screenshot looks like you only get this on a few pads, yes? One common cause of this is if the nets associated with those pads have a non-default net class that defines larger clearance requirements.
That said, you're using a non-standard palette which confuses me a little as to what's what. The highlights (which I assume are the DRC markers) are a slightly odd shape. It also looks like perhaps there are some layers that are hidden? Worth a look on them.
Thanks a lot. It was indeed a netclass that was applied to some nets. I don 't know how that could happen because I did not assign a net class to those nets.
Thanks a lot. It was indeed a netclass that was applied to some nets. I don 't know how that could happen because I did not assign a net class to those nets.
