Problems with stretch action

[Anonymous]

Hello,
Attached is a dynamic block I am working on and having some problems with stretch action.
On the right side you see a place where a person places no., revision/issues and date here, I would like to add a stretch action to add more lines incase more than two revisions are needed.
I tried using the linear dimension and stretch action but no luck.
Here is a link what I would for the revision part. https://www.youtube.com/watch?v=mSrIhgDucs8
Can anyone fix this for me

[h_s_walker]

Here you go. I changed it to an array so that the lines will appear as well. I also added a stretch to stretch the vertical lines.

[Anonymous]

Hello hwalker,

I have been struggling with this for awhile and was wondering can you do a screen cast on how you got this to work.

Thanks

[h_s_walker · Accepted solution]

Unfortunately I don't have screencast (office policy) so I can't show you.

So instead I'll try a step by step

1. Remove Distance 3 and Stretch 2 totally.

2. Add a linear array starting from the second line up and finishing at the top line.

3. Add the top line to the linear array.

4. Make the column array distance 3/8"

5. Make the minimum distance of the linear parameter 3/8" and the maximum 1'-1 1/8"

6. Make the linear parameter distance an increment of 3/8"

7. Add a stretch action to the linear parameter and add the two vertical lines to it. The stretch box only needs to encompass the top of the two vertical lines.

[Anonymous]

---

@h_s_walker wrote:

Unfortunately I don't have screencast (office policy) so I can't show you.

So instead I'll try a step by step

1. Remove Distance 3 and Stretch 2 totally.

2. Add a linear array starting from the second line up and finishing at the top line.

3. Add the top line to the linear array.

4. Make the column array distance 3/8"

5. Make the minimum distance of the linear parameter 3/8" and the maximum 1'-1 1/8"

6. Make the linear parameter distance an increment of 3/8"

7. Add a stretch action to the linear parameter and add the two vertical lines to it. The stretch box only needs to encompass the top of the two vertical lines.

---

Hello,

Thanks the steps were really good.