In attached Dynamic block There is 8 points I have to move them on following coordinates
0.1224,0.7129
0.6947,4.0477
1.4682,8.5539
2.3617,13.7594
3.5384,20.6155
4.3687,25.4528
4.8083,28.014
6.1623,35.9029
6.6455,38.7182
method I following in inserting points and moving manual but for bulk work is there any method to get it done another way?
On main file its I have to paste this block 40 time and I have 40X 9 Coordinates on alignment
@Amriya_Exe The only problem I'm having is I can't remember how to temporarily turn off the osnaps.
First I would place one of the objects at 0,0 and then copy it using a script file. See the image below and the .txt file attached. Change the extension of the text file to .scr and don't forgot to turn off your snaps (F3)
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hi thank you for showing interest here.
This is result of your script
I think you misunderstood my problem.
I would move your block away from the 0,0, then put a point on 0,0 and run the script then move your block back to 0,0
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Ah I was getting the wrong end of the stick. I see now you wish to move the circles. Unfortunately I can't think of any way of automating that
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
