Error in lookup when reset

[S_S_SS]

Hello every one ..
I made a dynamic block with visibility and double lookup 
but when i reset the block it makes error 
it make that 

but it really that 

the name of the lookup parameter changed 

and also when i rotate it change the lookup parameter also 

i uploaded the drawing 
and i need some one help me about that 
thanks in advance ....

[h_s_walker · Accepted solution]

A good rule of thumb is if you have a double lookup is to make sure it is visible in every state.

Talking of double lookups yours is the problem. You've got your references the wrong way round in Lookup 2

It should be

1-1

1-2

1-3

2-1

2-2

2-3

And not

2-1

2-2

2-3

1-1

1-2

1-3

[S_S_SS]

thanks sir
i solved but i can't understand what was wrong about that
when i write what you said it works correctly but (plan & elevation) lookup view reversed and i changed lookup04 and made
plan to 2000 and
elevation to 1000
to work correctly
can you explain what's the difference sir please ??

[h_s_walker · Accepted solution]

@S_S_SS Your block is a bit complicated. I've made you a new one it only uses 2 visibility states and stretches, and the advantage with this one is you can add different lengths quite easily.

For multiples of 3000 Distance 2 needs to be 150, for multiples of 4000 it needs to be 187.5 and for multiples of 5000 it needs to be 100

See the attached drawing. Just be aware that you need to do a regen for the number to update

[S_S_SS]

thanks sir
your solutions are great ..