Dynamic scale bar

[Anonymous]

Hello,?Does anyone happen to have a dynamic imperial architectural scale bar that I can use in a drawing I created in autocad civil 3d 2012?

Thanks

[imadHabash]

HI,

>> ..to have a dynamic imperial architectural scale bar that I can use..<<

you can found it in AUtoCAD in the Tool Pallets (Ctrl+3) see attached image

 

Good Luck..

[Anonymous]

---

@imadHabash wrote:

HI,

>> ..to have a dynamic imperial architectural scale bar that I can use..<<

you can found it in AUtoCAD in the Tool Pallets (Ctrl+3) see attached image

 

Good Luck..

---

Hello,

Thank you for your response but what I am looking for is a imperial dynamic scale bar that has the following scales 1"=1', 1/2"=1', 1/8"=1', 3/32"=1', 3/16"=1', 3/4"=1',1 1/2"=1', 3"=1', 16"=1',

Would you happen to have one that I can use?

Thanks

[Emmsleys]

Following up on your thread, it appears that several folks have tried to help on this issue. Were you able to find a solution? Or a workaround?

Did any of the posts in the thread help with your issue?

Please post back in the thread if you are still having an issue with AutoCAD or Select Accept as Solution for the post’s that helped.

Thanks for your time.

[Anonymous]

try inserting this at the scale of the drawing. 48 for 1/4"-1'-0"

[senji056]

I have the same issue. The scale bar menu doesn't have the architectural scales such as 1\8=1'-0"  , ... 1/32"=1'-0" and so one.  Can someone help please?

[vinodkl]

Try the attached graphic scale(see attachment)

[senji056]

Thank you very much.  All I needed

[senji056]

Accept

[timothy_crouse]

Nice Scale

[Anonymous]

Hello.  I would like our company to start using the dynamic imperial scale that was pictured in this thread.  I noticed 1"=40' is missing.  Is there a way to add scales?  I can't figure that part out.  thanks in advance.

[h_s_walker]

The block has multiple visibility states for the different scales. You need to add a new visibility state and some new text for the new distances

[wendi_burgin]

How do I add a new visibility state (basically another scale choice) to an existing dynamic block? 

[timothy_crouse]

In the block editor

On the ribbon tap the pane to bring up the visstate manager

tap NEW

Turn off any objects, r-click > object visibility > off for current state

drop your new scale into that view.

save and exit the block editor

Thats the general idea

-Tim C.