Dynamic Blocks Showcase: Share Your Favorite Dynamic Blocks

[Victoria.Studley]

Dynamic Blocks Showcase: share your favorite dynamic blocks and show us how you made them!

As a follow up to our latest dynamic blocks webinar, we'll post our favorite dynamic blocks here with Screencasts to illustrate how we created them.

Please join the conversation: share your own blocks or get some inspiration from your fellow community members. Let us know how you save time in your designs by using dynamic blocks!

If you're interested in watching our Dynamic Blocks webinars, or signing up for future AutoCAD webinars, check out these links:

• Sign Up: If you'd like to sign up for future AutoCAD webinars, you can do so via this link.
• Webinar 1: Introduction to Dynamic Blocks in AutoCAD
• Webinar 2: Dynamic Blocks Deep Dive in AutoCAD 2018

[timothy_crouse]

Inside the attached detail there is a ISO cable bundle with a wipeout.

Hope a designer or two find it useful.

Best Regards

-Tim C.

Please note the drawing uses named plot styles so if you're using CTB there is a little conversion required to get it to plot the way you would want/expect.

[timothy_crouse]

Here's an example of placing a curtain wall along a curved area using a dynamic block.

Hope folks find this useful

Best Regards

-Tim C.

[timothy_crouse]

Two 36 in dynamic door blocks, BYLAY and SWING BYBLOCK

Please note the swing is controlled via a parametric constraint which seems to get out of sync at times, specifically the arrow control will switch to the opposite end of the arc.  If this happens reset the block and use native acad commands to set the door into position.  It doesn't always happen and I have not been able to nail down the exact sequence to resync the control.  Hardly a hard stop, Anyways, hope someone finds these useful

Best Regards

-Tim C.