dynamic block - rotate multiple objects

dynamic block - rotate multiple objects

Anonymous
Not applicable
1,411 Views
2 Replies
Message 1 of 3

dynamic block - rotate multiple objects

Anonymous
Not applicable

Is there a way to set this block up so that once I adjust the rotation on the first antenna the others follow?

0 Likes
Accepted solutions (1)
1,412 Views
2 Replies
Replies (2)
Message 2 of 3

WarrenGeissler
Advisor
Advisor
Accepted solution

You need to add a separate ACTION for each antenna and set the BASE TYPE to INDEPENDENT - then set the base X and Y to the base point of each antenna. You can see an example here:

https://forums.autodesk.com/t5/dynamic-blocks-forum/dependent-and-independent-base-point-for-rotatio...

 


Warren Geissler
Drafting Manager Denver Water
_____________________________________________

Please ACCEPT AS SOLUTON if this works
(...and doesn't melt your computer or cause Armageddon)

0 Likes
Message 3 of 3

Anonymous
Not applicable

Took me a few to figure out what you were saying but it works!

0 Likes