Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Trying to create a steel angle dynamic block. Attached is a drawing showing the steel angle with its table showing sizes and length. Can't get it to stretch. Also don't know if I will have a problem with the radius of all the angle sizes. Using the sample files as a template. Please help me file in the blanks.
Trying to create a steel angle dynamic block. Attached is a drawing showing the steel angle with its table showing sizes and length. Can't get it to stretch. Also don't know if I will have a problem with the radius of all the angle sizes. Using the sample files as a template. Please help me file in the blanks.
I've attached a file containing steel sections and shapes, plus misc supporting blocks (weld, bolts, base pl, shear tab, etc) that I created using the same method @Libbya outlined in this thread. All steel sizes are from an AISC spreedsheet imported in the properties table.
I no longer use AutoCad so I am passing this forward and hoping someone else can use these!
I've attached a file containing steel sections and shapes, plus misc supporting blocks (weld, bolts, base pl, shear tab, etc) that I created using the same method @Libbya outlined in this thread. All steel sizes are from an AISC spreedsheet imported in the properties table.
I no longer use AutoCad so I am passing this forward and hoping someone else can use these!
