Drop down menu for lookup table

[Sujan.Maharjan]

Hi can i get drop down menu on lookup table for visibility states without having to create 2 lookups. Or any other way to do that maybe

Lookup 

          Custom Text 2> Visibility state 1

                                > Visibility state 2

         Custom Text 2   >Visibility state 3

                                >Visibility state 4

[ojuris · Accepted solution]

Block properties table

[Sujan.Maharjan]

I don't find any option for visibility state there. Could you post a screen shot jpg file or very simple block example

[Sujan.Maharjan]

Hi,

I almost Accepted your answer as solution. I'm attaching a dwg file here. I successfully created a simple one. But I do not find Visibility State option on the block I wanted to work with

[MetalFingerz]

What @ojuris meant was to use a block properties table (BTABLE command).

https://knowledge.autodesk.com/support/autocad-lt/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/Au...

[Sujan.Maharjan]

As i was exploring dynamic block discussion forum I came to know about about BTable. I found option to add all other parameters except Visibility state for block i created earlier.. I have attached my problem block in previous reply to @ojuris

[Libbya]

You need to check the little box that forces the block to match a row of the table.  You will need to make sure the as drawn state of the block does match a row for it to work.  

[ojuris]

you can add visibility states in Lookup actions or in Block properties table but not in both