WMS Layer not appearing in Display Manager

[Anonymous]

Hi there,

I am trying to get FEMA Flood contour lines to appear in my drawing. I successfully connected to their WMS. However, when I select the appropriate data in the "Add Data to Map" section (Base Flood Elevation) and then click "Add to Map" the layer does not appear in the Display Manger. I have nothing to select to raster the image and get it to appear in my drawing. I'm using Civil 3D 2018. Any assistance would be greatly appreciated. Thank you. 

[Pointdump]

Hi Kevin,
Welcome to the Autodesk Forums.
Try the Hotfixes available >>>Here<<<.
Dave

[Anonymous]

Thanks Dave. I have already added this hotfix, which fixed my initial issue of not being able to connect to the WMS. But now that I can connect, the layer I add doesn't show in my Display Manager.

[Pointdump]

Kevin,
Hit us with a link. I can test in 2018 on a home machine. (No network issues)
Dave

[Anonymous]

Thanks Dave. Below is the WMS link for FEMA. I'm in south Florida.
https://hazards.fema.gov/gis/nfhl/services/public/NFHLWMS/MapServer/WMSServer?request=GetCapabilitie...

[Pointdump]

Kevin,
I'm getting same. Can't get it to work in QGIS either. I even tried a couple other URL's. Nope. So I don't know whether it's offline temporarily or they decided to pull the rug out from under everyone again with a new protocol or format or whatever.
Dave

[Anonymous]

Well thanks for trying. Any advice on getting Base Flood Elevations contour lines from FEMA into my drawing without using GIS? That's all I'm trying to do.

[Pointdump]

I think most of the FEMA data is also available in shapefile format. I forget where to look, but I'll nose around and see if I can discover.

Dave

[Pointdump]

Try >>>Here<<<.

Dave