Subassembly composer help

[vas.milivoj]

Hi,

I have created subassembly. It makes retaining wall if certain depth, if less, it should made simple cut to surface. But it is not working. If someone is willing to check, i will appreciate
https://wetransfer.com/downloads/9381bb9eb99f65de9d88582e7dff05c120231231131651/3bba61

[ecfernandez]

Hi @vas.milivoj, I opened your file and moved the terrain up and down. I could see your PKT is creating both the cut and the retaining wall. Could you please tell us what is the problem you see with this geometry?

Regards!

[vas.milivoj]

Well finaly, what is wrong is version of composer. I have created it in composer 2021, but when i use it on PC with civil 2020, ti does not work.  you can see the error message attached. it says that distancetosurface is not a member of string. so i now have to find a way to change a code, since it does not get this expression. Do you maybe know what could be the problem, or how to solve this?

[ecfernandez]

Hi @vas.milivoj, try opening your PKT with subassembly composer 2020. Go to save as and make a copy of it. 

Give it a try

Regards!

[vas.milivoj]

see.. Any idea what to do?

[ecfernandez]

If that did not work, I would replicate the flowchart in Subassembly Composer 2020. That should not hurt since your logic branches are not pretty long.

Regards!

[vas.milivoj · Accepted solution]

You will laugh 🙂
i made point codes and link codes variables of the same name as points and links 
For point P1 i made p1, P2 , p2, L1 l1.... that confused it 🙂
thank you for your help 🙂
Happy NY 🙂

[ecfernandez]

Hi 

It's good to know you figured it out.

I'm always happy to help.

Happy New Year!